User's Manual

ManualsBrandsAvaya ManualsHandsetsAvaya DECT Messenger with CS1000 Rls 7.0 - Book 1

121

122

123

124

125

126

127

128

129

130

Launching FieldPoint Explorer 121

Launching FieldPoint Explorer

Connect the hardware modules.

Important notes

Note that DECT Messenger has the following limitations:

•

A single eIO instance can handle communications through either a

FP-1000 module (RS-232) or a FP-1600 module (Ethernet). So for

each FP-1000 or FP-1600, you need an instance of an eIO module.

• DECT Messenger supports the connection of only one eIO module.

While some environments are known to be stable with more than

one eIO module attached to a DECT Messenger, this is not officially

supported by the authors of the eIO module. Contact Nortel product

support before attaching more than one eIO.

• The eIO instance that handles an FP-1000 or FP-1600 can connect

to other modules, such as FP-1001 and FP-1601, to build a

tree-structure. The string can attach FP-AI-100, DP-DI-300, FP-DI-301,

FP-DI-330, and FP-DO-401 modules.

Note: DECT Messenger eIO is designed to support a maximum of

eight modules attached to an eIO instance. Connecting more that

eight modules is possible; however, because eIO can only handle

eight modules, the remaining modules are non operational from the

perspective of DECT Messenger.

At this stage, you must decide whether to use FP-1000 or FP-1600 to

connect the eIO instance. The following sections provide examples of

environments using FP-1000 and FP-1600, as follows:

•

“Example 1: sample environment using FP-1000 module” (page 121)

•

“Example 2: sample environment using FP-1600 module” (page 131)

Example 1: sample environment using FP-1000 module

Note:

Consult the National Instruments web site at http://www.ni.com to

obtain more information on installing and configuring the distributed

I/O modules.

The following four tables provide configuration examples for a sample

environment using FP-1000 module, as follows:

• Table 2 "Example 1a - FP-1000 module - Connect hardware modules"

(page 122)

• Table 3 "Example 1b - FP-1000 module - Adjust module configuration"

(page 124)

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010