User's Manual

108 Install PC - Step 2 - Nortel DECT Messenger

Note: The database file Messenger_CFG.mdb may not be

in use when you want to delete it, overwrite it, restore it or

replace it with a template database. There are four software

modules that can use or lock the database: eKERNEL,

eCONFIG, eGRID, and eWEB.

--End--

Shortcuts

You can navigate to Start > R4.0 – SOPHO Messenger@Net > Templates

to find the appropriate shortcuts for the imported configuration.

General remarks

In the templates, a working configuration is provided.

eDMSAPI

For traditional DECT systems, use the IP address of the DMC relay card.

You can change the configuration with eGRID in table eDMSAPI, or use

the eCONFIG maintenance tool.

For SIP DECT systems, use the IP address of the DAP Controller PC,

192.16.7.13. You can change the configuration with eGRID in table

eDMSAPI, or use the eCONFIG maintenance tool.

eLOCATION

eLOCATION is applicable only to SIP DECT systems. Use the IP address

of the DAP Controller PC, 172.16.7.13. You can change the configuration

with eGRID in table eLOCATION, or use the eCONFIG maintenance tool.

Nortel Communication Server 1000

DECT Messenger Installation and Commissioning — Book 1

NN43120-301 02.01 4 June 2010