User's Manual

Using eCONFIG 95

that the information in the list comes from the table:

eKERNEL_DEVICE.

• Click Enter to send the message.

Verify that the message arrives at the extension that you have

specified; if the message arrives, your DMS-API is working

correctly.

Now you can set up the other modules as needed.

--End--

Figure 18

eWEB Properties

Using eCONFIG

The eCONFIG Module is the tool most commonly used for making

changes in the configuration. The configuration is stored in a Database.

Be cautious when editing the database, because incorrect or invalid entries

can interfere with the operation of DECT Messenger.

You can use the eCONFIG on the local PC that is the DECT Messenger

server PC. You can also install the eCONFIG on a remote PC to perform

remote configuration maintenance. The database is handled is differently

for local and remote maintenance.

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009