User's Manual

94 DECT Messenger Customer Engineer Manual

• Expand the item Modules > eWEB Module. One instance of

the eWEB module: eWEB - area <x> is shown.

•

Double-click the eWEB instance to open the parameters/pro

perties. Click IP addresses, as shown in Figure 18 "eWEB

Properties" (page 95).

The first line in the right pane contains the loop back address

(127.0.0.1) of the PC. Do not change this. The second line

contains the correct IP addresses.

•

Select the second line, and click Edit.

• Enter the IP address of the PC where the Apache server

resides in the field: eWEB_address_str.

•

Enter the IP address of the PC where the eKERNEL resides

in the field: eWEB_ekernel_address_str.

•

Any data in additional lines is normally not relevant, and can

be deleted.

Note: To delete a line:

— select the line.

— click Edit.

— click Delete.

WARNING

Do not select a line and click Delete, because that

deletes the entire module.

• Click OK to save the new settings.

14 Verify the operation of DECT Messenger.

• Start the eKERNEL from the shortcut in the Windows Start

menu.

• Start the CSTA_Service. This appears in the system tray.

• Start the eDMSAPI module.

• Open your WEB browser, and enter the correct DNS name

or the IP address of the PC where the Apache WEB server

resides.

• Log in with the name that you specified in the table

eWEB_USER_AUTH. The web page opens.

• In the left pane, go to Send DMS-API Message. Enter

a message, and select an extension from the list. Note

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009