User's Manual

Installing and getting started 93

11 Enter configuration information.

Enter the correct values for the IP addresses:

Area Description - Description field for the DECT system you are

connecting to. Seats Count - Total number of seats you require.

(See the Note at the end of this list)

Seats count for eKERNEL - Default value = 10

Seats count for external - Number of seats for eWEB - Default =

External IP address - The IP address of the PC on which the

eDMSAPI runs

External Port - Default = 2010

API Address - IP address of the PC where the CSTA_Service is

running

API Port - Default = 59000

PBX Address: IP address of the DMC on the DECT System you

are connecting to.

PBX Port - Always 1025 for DMC

PBX Type - Nortel

PBX License - Always Messenger

Note: Only specify the number of seats you anticipate

requiring, (not the total number of seats allowed by your

license), as takes longer for seats to register. Ensure that you

do not exceed the number of seats (CTI Messaging Channels)

as specified in your license Manager. If the number of seats

is not sufficient in the License, you cannot make an LRMS

(E2) message call.

12 Add a DECT Device.

13 Configure eWEB module.

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009