User's Manual

90 DECT Messenger Customer Engineer Manual

• Enter the Administrator name and Administrator e-mail.

• Enter the IP address of the PC where the eKERNEL resides

in the field: eKERNEL IP Address.

• Click OK.

7 Check the Configuration database path.

Still in the eCONFIG window, you must specify the database

locations (the default database path are usually correct).

• Set the path to the Messenger Configuration database to the

following directory: c:\SOPHO Messenger@net\Mdb\ (unless

you have installed to a directory other than the default). The

file name is Messenger_CFG.mdb.

• Check the path setting for the Configuration database;

normally you do not need to change this.

Note: The Configuration database type is always MS Access

and always points directly to a file (not using ODBC). The

default setting is shown in the following illustration:

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009