User's Manual

What is required to run DECT Messenger 83

The CSTA_Service provides the CTI link to the DMC.

Connection to Multiple DECT Systems

To connect to more than one DECT system you must have a CTI link

for each DECT system. Check your license for the number of CTI links

available to you.

For each DECT system, you must configure a new eDMSAPI module

instance. Each DECT System must be configured in a different Area,as

shown in Figure 17 "Connecting to two DECT systems" (page 83).

Figure 17

Connecting to two DECT systems

Example: Connecting to Two DECT systems. eKERNEL and

eCONFIG are on PC One, as shown in both Figure 17 "Connecting to

two DECT systems" (page 83) and “Example: Connecting to Two DECT

systems.” (page 83) . Within the eCONFIG are two eDMSAPI module

instances configured for two areas.

• eDMSAPI Area 1 contains the IP addresses for PC 1, and PBX IP

address for DECT System 1.

• eDMSAPI Area 2 contains the IP addresses for PC 2, and PBX IP

address for DECT System 2.

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009