User's Manual

82 DECT Messenger Customer Engineer Manual

— Windows 2000/XP Professional or Windows 2000/2003 Server.

—

If you decide to use MS SQL Server as the database engine, you

must have Windows 2000/2003 Server. Windows 2000/2003/XP

Professional is not supported for SQL Server. (MSDE is supported

under Windows 2000/2003/XP Professional.)

— Minimum required Service Package is SP4.

— WINZIP to unzip the DECT Messenger files during installation.

— Virus scanner, because your DECT Messenger is connected to a

network.

•

Optional software.

— Internet Information Server (IIS) under Windows 2000. This is only

required if you use the eSMTP-Server module for receiving e-mail.

— Apache WEB server under MS Windows. Apache Web server is an

optional component that is included on the CD-ROM, and can be

installed during set up of DECT Messenger.

DMC Conﬁguration

This section describes DMC configuration requirements and options.

General

DECT Messenger version 4.0 supports the Nortel DECT Mobility Cards

(DMC) with the following firmware:

•

DMC-4 Firmware: 45100499.dwl

•

DMC-8 Firmware: 47000499.dwl

Connection to a DMC

The DECT Messenger Server can be connected to the DMC (DECT

system) using a TCP/IP connection. Verify that your network allows traffic

from DECT Messenger to the DMC.

DECT Messenger uses a CTI port to send and receive LRMS messages,

requiring one CTI Messaging Link for each connection to a DECT system.

On the DMC card, the default port number to be used for LRMS Messages

is 1025.

To connect to the DECT system you must have the following applications

running on your DECT Messaging Server.

• DECT Messenger eKERNEL

• CSTA_Service (runs in the system tray)

• DECT Messenger eDMSAPI

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009