User's Manual

ManualsBrandsAvaya ManualsHandsetsAvaya DECT Messenger Fundamentals with CS1000 Rls 6.0

What is required to run DECT Messenger 81

— Work with devices

—

Work with facilities

•

Expert maintenance

— Import Template configuration

Refer to Module - Web Administrator User Guide in DECT Messenger

Installation and Commissioning (NN43120-301) for more information.

What is required to run DECT Messenger

Hardware Requirements

The hardware requirements for DECT Messenger are grouped into

mandatory requirements and optional requirements. The optional

requirements depend mainly on the number of modules and users, and

the type of modules.

• Mandatory PC Requirements

—

Intel

Pentium

4 processor, 1.8 GHz.

—

256K cache 256MB SDRAM.

— 10/100 MB Network interface card.

—

3.5 Floppy Drive.

—

10 GB free Hard disk space.

—

CD-ROM player.

•

Optional PC requirements

—

Analogue Modem for remote maintenance/support.

—

Analogue Modem for dialling to GSM provider to send SMS

messages. Only required if you must send SMS messages to a

GSM (cell phone) provider using a dial-in option.

— Internal Serial Watchdog (type 1120 from Berkshire Products,

www.berkprod.com).

—

National Instruments equipment for Digital input, Digital output

(contacts), and analogue input options (for software module eIO).

See the chapter dealing with National Instruments products in

DECT Messenger Installation and Commissioning (NN43120-301)

for more information.

— V.24 multi port card.

Software Requirements

DECT Messenger works with the following required and optional software:

• Required software

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009