User's Manual

Adding a DECT device to the Messenger system 53

For more information about Device ID, see “Device

parameters” (page 27)

• Configure the Output Program Facility according to the type

of DECT handset you have.

Example: C4050

•

Visual DNR

The Directory Number (DN) of the DECT handset.

Example: 2947

•

Description

Add a description of the handset. This can be the name of

the handset owner.

Example: Emmett Lee

This description is displayed on the eWeb ’Send DMS-API

Message’ Extension box.

• Set IO Register to True

4 Check alarms.

• In eCONFIG, open the menu Modules, and expand the

eDMSAPI module by clicking the + beside it. Under the

eDMSAPI module, the instances of the input module (For

example, eDMSAPI - area One) are listed. Expand this

instance. The items Alarm and Group appear. Click Alarm.

• Ensure that you have at least two Alarms, as follows:

— E2_MSG_N

— E2_MSG_U

5 Add a group.

• In eCONFIG, open the menu Modules, and expand the

eDMSAPI module by clicking the + beside it. Under the

eDMSAPI module, the instances of the input module (For

example, eDMSAPI - area One) are listed.

• Expand this instance. The items Alarm and Group appear.

• Right-click Group, and select New Group in the pop-up

menu.

6 Configure the new group.

Make the following configuration changes:

• Populate the Group_Name. If you are adding a single DECT

handset, use the DN of this handset as the group name.

• Populate the Description

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009