User's Manual

eCONFIG 47

The parameters are explained in “User parameters” (page 49).

6 Confirm your choices.

Click OK and follow the instructions on the screen, if applicable.

--End--

Changing user properties

The following procedure describes how to change the properties for user.

Procedure 10

Changing user properties

Step Action

1 Open the Group Members window.

2 Expand the All Users menu.

Two menu items are available: eWEB and eCONFIG. eWEB

contains the users for eWEB and eCONFIG contains the users

for eCONFIG. These are separate from each other, however the

approach and authority mechanism is the same, so the steps in

this section apply to both.

3 Select the menu item that contains the user you want to edit.

Select either eCONFIG or eWEB, depending on where the user

resides. A list of users opens in the right panel.

4 Open the Properties window for the user you want to edit.

Double-click the user for which you want to change the

properties.

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009