User's Manual

ManualsBrandsAvaya ManualsHandsetsAvaya DECT Messenger Fundamentals with CS1000 Rls 6.0

44 Nortel DECT Messenger Administrator Guide

Member parameters

Member parameters are parameters that are added to a device for a

specific group. These parameters are only applicable for the combination

of a device and a group, and can be different after the same device is

assigned to another group.

The following parameters can be specified for a group member:

•

Group ID

The Group ID field defines a unique identifier for a group. The field

is a unique key in the database that is created automatically after

you create a new group. You cannot change the Group ID at this

parameter.

• Device ID

Use the Device ID parameter to assign each device as a member of a

group. Always use the Browse button that is active after you click this

menu item.

The parameters display after you select each device, because these

are linked to the device that you select.

•

From:

The From: value contains a value in format xx:xx, where a valid hour

and time must be specified. Valid range is 00:00 to 23:59. Incorrect

values give unpredictable results. The value denotes the start of the

time interval during which the defined device is active as a member

of the group. For example, a value of 00:00 indicates that the group

member is active at midnight. Value 12:00 specifies that the group

member starts at noon. The time interval ends in the time specified in

the To: value.

•

To:

The To: value contains a value in format xx:xx, where a valid hour

and time must be specified. Valid range is 00:00 to 23:59. Incorrect

values give unpredictable results. The value denotes the end of the

time interval during which the defined device is active as a member

of the group. For example, a value of 23:59 indicates that the group

member becomes inactive at midnight. A value of 12:00 specifies that

the group member stops its activity at noon. The time interval begins

at the time specified in the From: value (see the previous bullet). The

From: value can be larger than the To: value. In this case, the active

time can start at 21:00 and end at 06:00 (night-shift). Also note that a

member can be active from both 08:00–12:00 and 13:15–17:30. To

define two time intervals for the same device, you must define it as two

group members (same device): one active from 08:00–12:00, and the

other active from 13:15–17:30.

• Monday . . . . Saturday

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009