User's Manual

eCONFIG 43

In the right panel of the window is a list of one or more group

members that are assigned to the group. Select the group

member that you want to edit, and click

Edit.

3 Change the parameters.

A window, similar to the one in Step 4 of “Assigning a new

member to a group” (page 39), opens, however all parameters

are entered.

•

Click the item you want to change.

Note: You can change all parameters except the group ID

and the parameters for device ID.

4 Confirm your choices.

Click OK and follow the instructions on the screen, if applicable.

--End--

Removing a group member

Complete the following steps to remove a member from a group.

Procedure 8

Removing a group member

Step Action

1 Open the Group members window.

Follow Steps 1, 2, and 3 in “Assigning a new member to a group”

(page 39).

2 Select the group member to remove.

In the right panel of the window is a list of one or more group

members that are assigned to the group. Select the group

member that you want to edit, and click Edit.

3 Remove the member from the group.

A window, similar to the one in Step 4 of “Assigning a new

member to a group” (page 39), opens, however all parameters

are entered.

• Remove the member by clicking the Delete button.

4 Confirm your choices.

Click OK and follow the instructions on the screen, if applicable.

--End--

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009