User's Manual

eCONFIG 37

paging number, group, or destination. In most cases, the group names

are determined by third-party vendors and cannot be changed.

Note:

You can use the same group name for more than one

input program. You can use the same group name because the

DECT Messenger software adds the input program ID to the group

name, which makes the group ID unique. This group ID is created

automatically after you create the group. However, you can change

the group name later. The Group ID remains the same.

•

Description

Administrators can easily recognize the group (for example, Intensive

Care) by reading the descriptive text in the Description field.

•

Comments

The Comments field contains additional information. For example,

"Warning: minimum three DECT extensions required".

•

Input program

The Input program parameter provides information about the input

program. You cannot change this parameter. After you create a

new group for an input program, these parameters are assigned

automatically.

•

Group members

Use the Group members parameter to assign group members to

the group (assign devices to the group from the list of devices). After

assigned, these devices become group members. If the device (for

example, an extension) that you want to assign is not in the list, create

that device first according to the procedures “Creating a new device”

(page 23).

Use the Group members menu to open the window shown in Figure 9

"Group members window" (page 38).

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009