User's Manual

34 Nortel DECT Messenger Administrator Guide

• A red bullet before an item indicates that the parameter is

mandatory.

•

Some items contain default parameter values.

• Nortel recommends that you use the Browse option, when

present, to define a location, rather than typing an entry.

Note 1: The group name that you enter must match the group

name entered for the input module. If the input module is

an eAPI, eCAP, or eESPA, the group name matches that in

the external system. Therefore, you must know the external

system that delivers the group name.

Note 2: The input module provides not only a group name,

but also an alarm. Ensure that the alarm from the input

module corresponds to an alarm in the alarms list. Ask a

system specialist if you are uncertain about this.

The parameters are described in more detail in “Group

parameters” (page 36).

4 Confirm your choices.

Click OK and follow the instructions on the screen, if applicable.

--End--

Changing group parameters

Complete the following steps to change group parameters.

Procedure 5

Changing group parameters

Step Action

1 Open eCONFIG.

2 Select the input module for which you want to change the group

parameters.

Select the input module for which you want to change group

parameters from the Modules menu.

Note: A group is always associated with an input module.

However, to change group parameters, you can also select a

group from the Groups and Devices menu.

3 Open the group.

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009