User's Manual

32 Nortel DECT Messenger Administrator Guide

• Remote access site

The Remote access site parameter is only applicable when you

have more than one site, and you are using the web interface. A web

server (eWEB) and a device are each assigned to only one site; if

both are assigned to the same site, you can see the device from the

web interface. Devices assigned to sites other than that to which the

web server is assigned are only visible if the Remote access site

parameter is set to True.

• Remote access area

The Remote access area parameter is only applicable when you

have more than one area, and you are using the web interface. A web

server (eWEB) and a device are each assigned to only one area; if

both are assigned to the same area, you can see the device from the

web interface. Devices assigned to areas other than that to which the

web server is assigned are only visible if the Remote access area

parameter is set to True.

•

Comments

This field is informational only, and can contain remarks from the

administrator.

Managing groups

Creating a new group

Complete the following steps to create a new group.

Procedure 4

Creating a new group

Step Action

1 Open eCONFIG.

2 Access the pop-up menu of the input module for which you want

to create the new group.

• Select the input module for which you want to create a new

group from the Modules menu.

Note: A group is always associated with an input module. You

cannot create a new group in the Groups and Devices menu.

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009