User's Manual

ManualsBrandsAvaya ManualsHandsetsAvaya DECT Messenger Fundamentals with CS1000 Rls 6.0

eCONFIG 31

the same or another extension. To reset the alarm using eDMSAPI

(IC), the CLI of the calling extension must be entered here as the

pincode.

•

Priority

Reserved for future use.

• Retry count alternative device

Retry count alternative device defines how many times the

application tries to deliver the message before switching to an

alternative device (if one is defined in the list of Alternative Devices in

the Groups and Devices menu). The default value is 30. Therefore, if

an alarm has a silence interval (defined in the alarm properties) of 120

seconds, the alarm is removed for this device after one hour (and set

for the alternative device, if defined).

A value of 0 indicates that the application never tries to send the

message to an alternative device, and that the alarm is sent to the

device every silence interval until the alarm is reset by the input

program, for example (a reset). A value of 1 indicates that after one

attempt, the application clears the message for this device and send

the message to the alternative device, if defined.

Note: In this second case (value=1), the switch to the alternative

device is immediate (that is, there is no silence interval between

the two calls). Therefore, you must ensure that there are no loop

conditions defined in the list of alternative devices.

A value of 2 indicates that the alternative device is contacted after the

second attempt.

•

IO Register

This parameter is only applicable for devices that are assigned to

output program eDMSAPI.

All devices with this value set to True are monitored by the eDMSAPI

to see if an E2 message is sent. After a device sends an E2 message,

the message always goes to DECT Messenger directly (and not to

the destination number). Messages sent to DECT Messenger are

processed by DECT Messenger in the same way that messages

from other input devices are processed. There must be a correct

specification in the eDMSAPI inbound configuration that points to a

group and an alarm. The message is sent to the group members in the

group that is assigned to the inbound configuration in the eDMSAPI.

• Alternative devices

Use this parameter to assign one or more alternative devices to a

device. After you click this item, a panel at the right side of the window

displays the list of possible alternative devices. Select New from the

menu to add an alternative device. Select Edit to make changes in the

list of alternative devices already assigned to this device.

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009