User's Manual

eCONFIG 23

Managing devices

The following sections provide information that explain the following DECT

Messenger tasks:

• creating a new device

• changing the parameters of an existing device

• editing device parameters

The following are examples of device types in DECT Messenger:

• DNR in the DMC

•

Directory Number (DN) in SIP DECT

• e-mail address

• cell phone number (for SMS)

• relay contacts

You must know the properties of each device type relative to the

equipment that hosts it (that is, device properties in the DMC, in the Mail

Server, and so on).

Note: Task procedures are in explained in the following sections. To

carry out these procedures, you must have sufficient user rights to

access all the menus that are used in these procedures. If you do not

have sufficient rights, you cannot see the menu options described, or

you see them but cannot make changes.

Creating a new device

Complete the following steps to create a new device.

Procedure 2

Creating a new device

Step Action

1 Access the eCONFIG Groups and Devices menu.

• Open eCONFIG.

• Expand the Groups and Devices menu by clicking the + to

the left of it.

2 Add a new device.

• Right-click the All Devices parameter.

• Select New Device as shown in the following example:

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009