User's Manual

Checking diagnostics 171

Figure 57

Connections Tab

The right pane gives information about the external devices that are

connected to the eIO Module. The left pane shows information about

the TCP/IP connections. The connections between the eKERNEL

and the eIO module are shown in the top part of the left pane. The

connections between the IO module and (if applicable) an external

device are shown in the bottom part of the left pane. The TCP/IP

connections that are shown comprise the local and remote IP address

with the port number that is used for this socket.

Figure 57 "Connections Tab" (page 171) shows only one TCP/IP

connection between the eIO module and the eKERNEL. If another

TCP/IP connection is available, the bottom part of the left pane is filled

in.

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009