User's Manual

ManualsBrandsAvaya ManualsHandsetsAvaya DECT Messenger Fundamentals with CS1000 Rls 6.0

161

162

163

164

165

166

167

168

169

170

168 DECT Messenger Customer Engineer Manual

• <type>DI</type>

This tag indicates the type of message, which indicates that the

message was generated by the Digital Input contact.

• <module>02</module>

This tag specifies from which module the message comes. In Figure

53 "IO Module log file" (page 167), the message comes from the

second module.

• <contact>01</contact>

This tag indicates the contact on the IO module.

•

This tag indicates the contact status. 1 means that the contact was

activated.

In the file shown in Figure 53 "IO Module log file" (page 167), the following

messages have been exchanged between the eIO module and the

eKERNEL for each line:

1. 18/11/2002 11:53:04 - O:TCP:<xml><msgrqs>type>DI</ type><module

>02</module><contact>01</contact><sts>1</sts></msgrqs></xml>

An outgoing message request from eIO to eKERNEL. Contact 01 on

module 02 has been activated. (The input module is type DI.)

18/11/2002 11:53:05 - O:TCP:<xml><msgrqs><type>DI</ type><modul

e>02</module><contact>01</contact><sts>0</sts></msgrqs></xml>

An outgoing message request from eIO to eKERNEL. Contact 01 on

module 02 has been de-activated. (The input module is type DI.)

18/11/2002 11:53:06 - I:TCP<:xml><msgrqs><id>00431</

id><site>1</site>module>03</module><contact>01</

contact><sts>1</sts><reset_delay>3</reset_delay></msgrqs></xml>

An incoming message request in eIO from eKERNEL. Command

to activate contact 01 on module 03 for a time period of 3 seconds.

(Message identifier 00431.)

4. 18/11/2002 11:53:06 - O:TCP:<xml><msgrpy><id>00431</ id><module

>03</module><contact>01</contact><sts>ACK</sts></msgrpy></xml>

An outgoing message reply from eIO to eKERNEL as an acknowledge

(ACK) on message request in line 3. (Message identifier 00431.)

5. 18/11/2002 11:53:06 - I:TCP:<xml><msgrqs><module>03</

module><contact>01</contact><sts>0</sts><reset_delay>0</

reset_delay></msgrqs></xml>

An incoming message in eIO from eKERNEL to reset the contact 01 in

module 03.

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009