User's Manual

Checking diagnostics 167

Figure 53

IO Module log file

Figure 53 "IO Module log file" (page 167) shows the contents of a log file

for the IO module. The subsequent XML strings are the result of pressing

a button on the DI module, module 02, contact 01. As result of pressing

this button, contact 01 is activated on the Digital Output module 03 for

three seconds.

The following is an analysis of the first line in Figure 53 "IO Module log

file" (page 167):

• 18/11/2002 11:53:04 -

The date and time

• O:TCP

This string indicates message direction and protocol. In this case

an outgoing XML string using TCP/IP. Outgoing means that the

information goes from this module to another module (generally the

eKERNEL). If the message is incoming into the module, the following

is displayed: I:TCP.

• <xml> ...... </xml>

These tags enclose xml content. <xml> marks the start, while <xml>

marks the end.

• <msgrqs> .... </msgrqs>

This tag indicates that this is a message request. If the line is

<msgrpy> .... </msgrpy>, the xml string is a reply to a previous

request.

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009