User's Manual

Checking diagnostics 165

to which devices the alarm/message was sent. You also know

the most important parameters that were used to send the

alarm/message.

6 Use the identifiers that you used in the previous steps:

OUTRQS id, INRQS id, DATE, TIME and Message, to check the

reply/response of the devices in the file OUTrpy.csv. This shows

you if the device did receive the message, did respond to the

message or if the message was diverted to an alternative device.

--End--

Checking diagnostics

General

The following diagnostics options are discussed in this section:

•

“Logging” (page 165)

•

“Module Window” (page 169)

Logging

You can use logging to trace history. All the events in each individual

module are stored in a log file. Log files are stored in a common directory,

as shown in Figure 52 "Log file location" (page 166).

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009