User's Manual

162 DECT Messenger Customer Engineer Manual
• DEVICE Outpgm
Output Program of the output device that generated the response.
• DEVICE Outpgm Facility
Output Program facility of the output device that generated the
response.
• MESSAGE
This is the actual message that was send to the output device and for
which it generated the response.
•
ALARM id
This shows the ALARM id that was used for the outgoing message, on
which the device generated the response.
•
ALARM Prty
This shows the ALARM priority that was used for the outgoing
message, on which the device generated the response.
•
ALARM Description
This shows the ALARM Description that was used for the outgoing
message, on which the device generated the response.
•
REMOVE AFTER
An Input Program provides the Remove After parameter. It indicates
whether the alarm request stays active until a reset is received from
the input program or not.
•
CONFIRM ACTION
This shows the setting of the Alarm Confirm Action parameter in the
Alarm id. However, this function is not used anymore. Confirm action is
specified in the Group Delivery.
•
GROUP DELIVERY
This shows the setting of the Group Delivery parameter in the Alarm id.
Values can be *NONE, *ALL or *ANY. In case of *NONE the parameter
is ignored and the alarms remain on the device until an incoming
Confirmation is received for the device with a PIN code. In case of
*ALL, each individual recipient handles messages on individual basis.
In case of *ANY, the message must be distributed to at least one group
member. After the first user confirms, the message is considered
delivered and it removes the message for all group members.
• SILENCE Interval
This shows the setting of the Silence Interval parameter in the Alarm
id. This field defines the number of seconds between repeating the
alarm on a device if the device does not respond.
• STATUS
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 02.01
11 May 2009
Copyright © 2003-2009 Nortel Networks
.