User's Manual

ManualsBrandsAvaya ManualsHandsetsAvaya DECT Messenger Fundamentals with CS1000 Rls 6.0

151

152

153

154

155

156

157

158

159

160

160 DECT Messenger Customer Engineer Manual

Area of the output device to which the alarm was sent.

•

DEVICE Outpgm

Output Program of the output device to which the alarm was sent.

• DEVICE Outpgm Facility

Output Program facility of the device to which the alarm was sent. Note

that the Facility specifies the device type characteristics.

•

DEVICE Member status

This field indicates the status of the member based on its presence.

This status comes from the comparison between the actual time/date

and the presence definition on the device as group member. The

presence definition is defined through eCONFIG or eWEB after a

device is assigned to a Group or after you change the settings of a

device in a group.

•

MESSAGE

This is the actual message that is send to the output device. Here you

see the same message as in the Message field in the INrqs.csv file.

• ALARM id

This shows the ALARM id that is used for the outgoing message to

the device. According to the structure of DECT Messenger, an Alarm

id number or Alarm Description is provided by the Input program for

a certain incoming alarm. The Alarm ID and the Description has a

fixed relation. In the database, settings are related to this Alarm id

that specifies how the incoming alarm must be processed through

DECT Messenger. Therefore, you see this Alarm id also in this file for

Outgoing message to a device. This Alarm id is the same alarm ID as

found in the INrqs.csv for a specific incoming alarm.

•

ALARM Description

Some input programs deliver a character string which is an indication

for how the alarm is processed, such as priority and so on, instead of

an Alarm id. If the input program delivers such a string, for example

eWEB, eCAP, eAPI , and so on, it is always fixed to an Alarm id. This

Alarm id describes how the alarm must be processed.

• ALARM Prty

This indicates the priority for this alarm. A low value means high

priority. It comes from the definitions in the Alarm id.

• DIVERTED

This field indicates that a diversion is active on the output device. This

diversion can be a Follow me.

• DIVERTED DEVICE Id

Diversion destination device.

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009