User's Manual

eLOG 159
• eWEB user
Not yet implemented.
• PINCODE
After an incoming Confirmation is received, you see the PIN code in
this field. (For an Incoming Confirmation, the TYPE filed shows incrqs
*IC.)
• Reason not processed
This field gives you information on why an incoming alarm is
not processed. The messages gives you a clear indication of
the cause, such as an alarm cannot be processed. Another
example of a message is: Called device does not exist in table
eCSTA_INBOUND_EVENT.
OUTrqs.csv file
This file contains a record for each outgoing message (request) to a
device. The following columns are available:
•
OUTRQS id
This is a tag for each output request. This OUTRQS id is used in the
two OUT log files that specifies the output processing. Note that this
OUTRQSid is not unique in the logging files. It is used on a call-by-call
basis and can therefore be reused for a next call/alarm after the alarm
is finished.
•
INRQS id
This is a tag for each input request. This tag is a call-by-call identifier.
After the call is processed, the tag is free again and can be used for
another incoming alarm. Therefore this tag must always be seen in
relation to the incoming alarm time and date. This INRQS id is used in
the two other LOG files that specifies the output processing.
•
DATE
Date that the alarm was sent to the output device. Format:
YYYY-MM-DD
• TIME
Time that the alarm was sent to the output device. Format: HH-MM-ss
• DEVICE id
Device ID of the output device to which the alarm was sent. The
Device ID is not necessarily unique. However, the combination of
Device ID, Device Area, Device Outpgm and Device Outpgm Facility
make the device unique. Therefore you must always consider these
fields as a group, to avoid mistakes.
• DEVICE Area
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 02.01
11 May 2009
Copyright © 2003-2009 Nortel Networks
.