User's Manual

156 DECT Messenger Customer Engineer Manual

Figure 51

eKERNEL module refresh log file

The contents of these files are related to each other by means of

identifiers. You can import the files into a Spreadsheet application or

Database Application of your choice, for further analysis.

In the following sections, the contents of these files is explained.

ALARM Remove After GROUP id GROUP Description DEVICE id DEVICE

area DEVICE Outpgm eWEB user PINCODE Reason not processed

“” (page 156)

In the file INrqs.csv is detailed information on the incoming alarms. The

following columns are available:

• INRQS id

This is a tag for each input request. This tag is an identifier for each

call. After the call is processed, the tag is free again and is used for

another incoming alarm. Therefore this tag must always be seen in

relation to the incoming alarm time and date. This INRQS id is used in

the two other LOG files that specifies the output processing.

• DATE

Date in format: YYYY-MM-DD

• TIME

Time in format: HH-MM-ss

• SET or RESET

The incoming request was a request to Set or Reset an alarm.

• TYPE

Indicates the type of incoming message:

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009