User's Manual

Sending SMS messages 149

Figure 46

eASYNC settings

The following overview explains the eASYNC settings:

• Type

The type is either SMS for SMS messages to GSM phones, or Paging

for Wide Area Paging.

• Provider

This is the name of the (GSM) provider that provides the dial-in option

for SMS or Wide Area paging.

Note: This field only supports the following names: BELGACOM,

PROXIMUS, and KPN:

— BELGACOM refers to the Wide Area paging protocol.

— PROXIMUS and KPN refer to the Universal Computer Protocol

(UCP) for SMS messages, where PROXIMUS is the Belgium

provider, and KPN the Dutch provider. The difference between

PROXIMUS and KPN is that PROXIMUS requires a password

(proximus) to dial in, and KPN does not require a password. In both

cases the UCP protocol is used, and that protocol is supported by

many other GSM SMS providers.

• Settings/Serial port settings

The serial port settings depends on the settings that are supported by

the provider. Almost all providers support the following settings: 9600

b/s, no parity, 8 bits, 1 stop bit (9600,N,8,1).

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009