User's Manual

Using eSMTP Server 141
no x-receiver: field. Then the eSMTP_Server uses the field: To:
<[e-mail]> instead.
•
Subject: please call John
The message please call John is sent as message to the destinations
(devices).
Because DECT Messenger uses IIS, you must install and set up IIS. If you
are using Windows 2000 Server, IIS is installed automatically, and you
only have to configure IIS. If you are using Windows 2000 Professional,
you must install IIS separately, and then configure IIS. Installing IIS is
described in “Installing IIS” (page 141). Configuring IIS is described in
“Configuring IIS for DECT Messenger” (page 142).
In the eCONFIG you must set up the configuration for the eSMTP_Server.
For further information on setting up the eSMTP_Server, see the chapter
Install PC - Step 5 - eSMTP Server in
DECT Messenger Installation and
Commissioning (NN43120-301) .
Installing IIS
The following procedure guides you through the IIS installation process.
Note 1: You must have the Windows CD-ROM on hand to complete
this procedure.
Note 2:
In Windows 2000/XP Professional, IIS is not installed by
default. In Windows 2000/2003 Server, IIS is installed by default.
Procedure 21
Install IIS
Step Action
1 Open Add/Remove Programs.
•
Click Start on the Windows task bar, and choose Settings
> Control Panel.
• Double-click Add/Remove Programs.
2 Open Add/Remove Windows Components.
Click Add/Remove Windows Components
3 Add Internet Information Services (IIS).
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 02.01
11 May 2009
Copyright © 2003-2009 Nortel Networks
.