User's Manual

132 DECT Messenger Customer Engineer Manual
Table 16
Switches 6 to 8. (cont’d.)
Switches 6-8
Delay Time
OFF- ON-OFF 30 Seconds
OFF- ON- ON 1 Minute
ON-OFF-OFF 10 Minutes
ON-OFF- ON 30 Minutes
ON- ON-OFF 1 Hour
ON- ON- ON 2 Hour
• COM Port Settings
The Watchdog requires that the COM port on the PC be set to 1200
Baud, 8 Data Bits, No Parity Bit, and 2 Stop Bits. The requirement
for 2 stop bits is important because the processor uses the idle time
between characters to process input data, and take care of other
processing tasks.
Note: These settings are fixed in DECT Messenger.
Automatic Watchdog Startup
The Watchdog is connected to the reset button of the PC. Watchdog
automatically restarts the PC if Watchdog detects that the software is no
longer running.
Note:
Automatic startup with automatic logon is only possible in
Windows 2000 professional in a Work Group environment. If you must
log on to a Windows 2000 domain, you must always log on manually.
Procedure 19
Automatic startup with login in Windows 2000 Professional
Step Action
1 Open the Users and Passwords window.
Click Start on the Windows task bar, and choose Settings >
Control Panel > Users and Passwords.
2 Disable login.
• Clear the check box Users must enter a user name and
password to use this computer as shown in the illustration.
• Click Apply, and, and then OK.
Nortel Communication Server 1000
DECT Messenger Fundamentals
NN43120-120 02.01
11 May 2009
Copyright © 2003-2009 Nortel Networks
.