User's Manual

Understanding Security features 129

• Disconnect the PC reset cable from the motherboard.

• Plug the cable onto the J3 header in the upper left corner of

the Watchdog.

The PC Reset connections are as follows:

3 Attach the reset cable.

Plug the supplied reset cable onto J2 on the Watchdog board,

and plug the other end onto the original reset header on the

motherboard.

4 Install the Watchdog.

Install the Watchdog in a free slot/bracket position.

5 Connect the power.

Connect the power cable to the Watchdog card.

6 Connect the serial cable.

• Connect the DB-9S end of the serial cable to a free COM port

on the PC.

• Connect the other end of the cable (DB-9P) to the Serial

Input port on the Watchdog.

7 Open the Site configuration window.

Start the PC, and start the eCONFIG. In eCONFIG double-click

the Site menu:

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009