User's Manual

Connecting National Instruments modules 123

4 Configure the comm resource

In the Comm Resources Configuration window, set the following:

• Name

Accept the default name (FP Res).

• Port

This is the COM port on your computer to which you have

connected your V.24 interface from the FieldPoint FP-1000

module.

• Baud Rate

Communication speed over the V.24 line. Default this is 115200

b/s. The DIP switch settings associated with the speed are

displayed. Ensure that the DIP switches for the Baud rate on the

FP-1000 module are in the same position as displayed in your

screen. The DIP switches on the FP-1000 module are under a

small cover on the top of the FP-1000 module.

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009