User's Manual

eLOCATION 115

• [Location] = the contents of the eLOCRPN_Message_str field in the

table eLOCATION_RPN

• [Location time] = current time

•

[Location date] = current date.

• [Calling number] = calling number.

• [Called number] = called number

The destination group, the message, and the Alarm ID are used to

dispatch the message to the appropriate destination(s).

eLOCATION Module in eCONFIG

The eLOCATION module is configured through eCONFIG.

Figure 33

eLOCATION module

A number of parameters, for example Site, Area, and so on, are the

same for all modules and therefore, are not explained here. However,

the following parameters are new in the eLOCATION module and require

some explanation:

• Location Agent Address

This is the IP address of the DAP Controller (DCC) to which the IP

connection is made.

• Location Agent Port

This is the port number on the DAP Controller (DCC) to which the IP

connection is made. The port number must be 28008 for a SIP DECT

system.

• General Timeout

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009