User's Manual

eDMSAPI Inbound 111

sent) the alarm call is cleared on this Acknowledge. If a message is

sent as an Urgent message, the alarm call is cleared after the second

Acknowledge arrives. After the user presses the

Delete or OK key on

the handset, the message call is acknowledged.

Figure 32

Acknowledge sequences for Normal and Urgent messages using DECT

handsets

For alarm handling, bear in mind the following when setting up the system:

• An alarm is set in a data table in the eKERNEL.

• Although the alarm is set in a table in the eKERNEL, the alarm is

always set on a Device.

• Because an alarm is set on a device, the alarm can only be reset on a

device.

• Resetting an alarm can be done from:

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009