User's Manual

108 DECT Messenger Customer Engineer Manual

An example of an Input Module that does not receive a message

from outside is the eIO Module. In the eIO Module you must assign

a message to a switch or button. Figure 28 "Message assigned to a

button" (page 108) shows the message assigned to a button.

Figure 28

Message assigned to a button

SET/RESET structure

The SET/RESET structure of alarms is complex; you can Set an Alarm

and wait for a Reset, or you can Set an Alarm from an Input Module to a

Device. In the following section, the various aspects of the SET/RESET

structure is explained.

• SENT

The type SENT is the simplest type of alarming. Figure 29 "Sent Alarm

structure" (page 109) shows the structure.

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009