User's Manual

106 DECT Messenger Customer Engineer Manual

Figure 26

Input contact 01

Figure 26 "Input contact 01" (page 106) shows an example of an input

contact 01 in the Input Module eIO. The input contact 01 in the column

eIODI_Contact_str is related to the alarm identifier Fire1 under the

column eIODI_ALA_Descr_str. Therefore, if the contact is activated,

the alarm Identifier Fire1 is sent to the eKERNEL. This also means that

there must be an Alarm Identifier in the eKERNEL_ALARM table called

Fire1. This Alarm Identifier for the eKERNEL is found in the eCONFIG,

under the eIO Module (because the Alarm identifier is used for the

eIO).

Nortel Communication Server 1000

DECT Messenger Fundamentals

NN43120-120 02.01

11 May 2009