User's Manual

• Close the License Manager.
3. Install a preconfigured database, if you have one.
DECT Messenger already contains a configuration database with data. However
you must adapt the data in the database to your needs.
However, if you have a preconfigured database, specifically made for your system,
you must install that database into the database directory, by carrying out the
following steps:
• Open the following directory using the Windows Explorer: c:\SOPHO
Messenger@net\mdb\.
• If the file messenger_CFG.mdb file exists, rename it with the following name:
previous_messenger_CFG.mdb.
• Copy the preconfigured database into the directory: c:\SOPHO
Messenger@net\mdb.
• Rename the copy with the following name: messenger_CFG.mdb.
4. Configure eGRID tables.
If you are not familiar with eGRID, skip to step 5. If you are familiar with eGRID, edit
the following tables:
• eKERNEL_AREA
• eKERNEL_SITE
• eDMSAPI
• eKERNEL_DEVICE
• eWEB
Use the help information to fill in the tables.
5. Start eCONFIG.
DECT Messenger Customer Engineer Manual
84 DECT Messenger Fundamentals March 2012
Comments? [e-mail]