User's Manual
Figure 18: Connecting to two DECT systems
Example: Connecting to Two DECT systems.
eKERNEL and eCONFIG are on PC One, as shown in both Figure 18: Connecting to two DECT
systems on page 79 and Example: Connecting to Two DECT systems. on page 79. Within the
eCONFIG are two eDMSAPI module instances configured for two areas.
• eDMSAPI Area 1 contains the IP addresses for PC 1, and PBX IP address for DECT
System 1.
• eDMSAPI Area 2 contains the IP addresses for PC 2, and PBX IP address for DECT
System 2.
Table 9: Example: Connecting to two DECT systems
PC 1:
PC 2:
License, Dongle, License Manager eDMSAPI module - Area 2
eKERNEL
eCONFIG
CSTA_Service (With at least 2 CTI links)
eDMSAPI module - Area 1
What is required to run DECT Messenger
DECT Messenger Fundamentals March 2012 79