User's Manual

5. Add a group.
In eCONFIG, open the menu Modules, and expand the eDMSAPI module by
clicking the + beside it. Under the eDMSAPI module, the instances of the input
module (For example, eDMSAPI - area One) are listed.
• Expand this instance. The items Alarm and Group appear.
• Right-click Group, and select New Group in the pop-up menu.
6. Configure the new group.
Make the following configuration changes:
Populate the Group_Name. If you are adding a single DECT handset, use the
DN of this handset as the group name.
• Populate the Description
• Group Members. Click New. Browse under Device_ID for the device you
created in Step 2.
• Group Authority. Click New. Under User_ID browse for *ALL
7. Open the Inbound data call handling menu.
• In eConfig, open the menu Modules, and expand the eDMSAPI module by
clicking the + beside it. Under the eDMSAPI module, the instances of the input
module (For example, eDMSAPI - area One) are listed.
• Right-click the instance of the eDMSAPI module (For example, eDMSAPI -
area One), and click Open in the pop-up menu.
• Scroll to the bottom of the menu and expand Inbound data-call handling.
• 3 choices are displayed:
- Inbound
- Inbound Event
- Inbound Result
Avaya DECT Messenger Administrator Guide
50 DECT Messenger Fundamentals March 2012
Comments? infodev@avaya.com