User's Manual

Click OK and follow the instructions on the screen, if applicable.
Changing group member parameters
Complete the following steps to change the parameters for a group member.
Changing group member parameters
1. Open the Group members window.
Follow Steps 1, 2, and 3 in
Assigning a new member to a group on page 37.
2. Select the group member to edit.
In the right panel of the window is a list of one or more group members that are
assigned to the group. Select the group member that you want to edit, and click
Edit.
3. Change the parameters.
A window, similar to the one in Step 4 of
Assigning a new member to a group on
page 37, opens, however all parameters are entered.
• Click the item you want to change.
Note:
You can change all parameters except the group ID and the parameters for device
ID.
4. Confirm your choices.
Click OK and follow the instructions on the screen, if applicable.
Removing a group member
Complete the following steps to remove a member from a group.
Removing a group member
1. Open the Group members window.
Follow Steps 1, 2, and 3 in
Assigning a new member to a group on page 37.
2. Select the group member to remove.
In the right panel of the window is a list of one or more group members that are
assigned to the group. Select the group member that you want to edit, and click
Edit.
3. Remove the member from the group.
Avaya DECT Messenger Administrator Guide
40 DECT Messenger Fundamentals March 2012
Comments? [e-mail]