User's Manual

Figure 11: Group authority
Click the New button to give a new user the authority to make changes in the group. Click
the Edit button to edit a user authority.
Warning:
If you want to delete a user from this group, do not click Delete in the window shown
in Figure 11: Group authority on page 37, because that deletes the entire group.
Instead, click Edit. A window specifically for that user opens. Click Delete in this
window to remove the user from the group.
Managing group members
A group has group members. These are devices to which an alarm for that group is sent. You
can assign new members to a group, and you can delete members from a group. These
procedures are described in the following sections:
Assigning a new member to a group on page 37
Changing group member parameters on page 40
Removing a group member on page 40
Member parameters on page 41
Assigning a new member to a group
Complete the following steps to assign a new member to a group.
Maintaining DECT Messenger using eCONFIG
DECT Messenger Fundamentals March 2012 37