User's Manual

Note:
You can use the same group name for more than one input program. You can use the
same group name because the DECT Messenger software adds the input program ID
to the group name, which makes the group ID unique. This group ID is created
automatically after you create the group. However, you can change the group name
later. The Group ID remains the same.
• Description
Administrators can easily recognize the group (for example, Intensive Care) by reading
the descriptive text in the Description field.
• Comments
The Comments field contains additional information. For example, "Warning: minimum
three DECT extensions required".
• Input program
The Input program parameter provides information about the input program. You cannot
change this parameter. After you create a new group for an input program, these
parameters are assigned automatically.
• Group members
Use the Group members parameter to assign group members to the group (assign
devices to the group from the list of devices). After assigned, these devices become group
members. If the device (for example, an extension) that you want to assign is not in the
list, create that device first according to the procedures
Creating a new device on page
22.
Use the Group members menu to open the window shown in Figure 10: Group members
window on page 36.
Maintaining DECT Messenger using eCONFIG
DECT Messenger Fundamentals March 2012 35