User's Manual

Figure 58: Connections Tab
The right pane gives information about the external devices that are connected to the eIO
Module. The left pane shows information about the TCP/IP connections. The connections
between the eKERNEL and the eIO module are shown in the top part of the left pane.
The connections between the IO module and (if applicable) an external device are shown
in the bottom part of the left pane. The TCP/IP connections that are shown comprise the
local and remote IP address with the port number that is used for this socket.
Figure 58: Connections Tab on page 161 shows only one TCP/IP connection between
the eIO module and the eKERNEL. If another TCP/IP connection is available, the bottom
part of the left pane is filled in.
Checking diagnostics
DECT Messenger Fundamentals March 2012 161