User's Manual

• >>>Board Definition
Refers to the table: eLOCATION_BOARD. This table defines the relation between the
DAP Controller and the predefined extension number. Each DECT extension is
subscribed at one DAP Controller only.
Note:
DCC board numbers ranges from 01 to 32.
• >>>RPN Definition
Refers to the table: eLOCATION_RPN. This table defines the relation between the RPN
number and a meaningful message. This message must contain the location
information.
• Inbound Call Handling >>> eDMSAPI inbound event
Refers to the table: eDMSAPI_Inbound_Event. This table defines the relation between
the Calling Line ID, the Called Line ID and the Alarm Identifier. The Alarm Identifier
determines how the Alarm is processed.
• Inbound Call Handling >>> eLOCATION inbound result
Refers to the table: eLOCATION_ INBOUND_RESULT. This table defines the relation
between the Calling Line ID, the Called Line ID and the Group (destination) to which the
alarm/message must be sent.
Connecting National Instruments modules
General
The Digital Input, Digital Output, and Analogue Input options are achieved using FieldPoint
modules of National Instruments. Figure 35: Rail with National Instruments FieldPoint IO
Modules on page 111 shows the National Instruments IO modules on a rail.
DECT Messenger Customer Engineer Manual
110 DECT Messenger Fundamentals March 2012
Comments? [e-mail]