Reference Guide

3 Configuration commands Audit status command
NN47928-107 25
audit status
Use this command to configure audit logging. Audit logging fills a table of
100 entries in FIFO order.
Note: In the current version, the audit log is saved on compact flash.
Syntax config audit status enabled [yes|no]
Parameters enabled yes|no Enable/disable audit logging. The default is
enabled (yes).
Example > config audit status enabled no
The following example accesses a stored audit log.
Example > ls /cf0usr/Audit
.
..
auditlog
> cat /cf0usr/Audit/auditlog
08:33:11: admin CONFIG shell terminal
09:35:14: nnadmin INVALID LOGON at TUE MAY 15 09:35:14 2007
09:35:19: nnadmin INVALID LOGON at TUE MAY 15 09:35:19 2007
09:36:38: admin CONFIG sip ua port 1
11:46:12: admin CONFIG system images 1
Related
commands
display audit status
show audit status