Reference Guide

3 Configuration commands Voice Commands
NN47928-107 183
voice tones
Use this command to configure tone types for the FxS port. Each tone type
is assigned cadence, frequency, and level values. Available tones are:
z dial tone
z call waiting tone 1
z ringback tone
z call waiting tone 2
z busy tone
z reorder tone
z congestion tone
z stutter dial tone
z test tone
z off hook warning tone
Syntax config voice tone
[dial|ringback|busy|congestion|callwait1|callwait2|reorder|st
utter|offhookwarn|test] on1 <cadence> off1 <cadence> on2
<cadence> off2 <cadence> freq1 <freq> level1 <level> freq2
<freq> level2 <level>
Parameters tone dial|ringback|busy|congestion|callwait1|
callwait2|reorder|stutter|offhookwarn|test
Enter the tone type to be reconfigured. This
parameter is mandatory.
on1 cadence
off1 cadence Define the first ringing cadence (in ms).
on2 cadence
off2 cadence Define the second ringing cadence (in ms).
freq1 freq
level1 level Define the first frequency (in Hz) and level (in
db). Level is defined in db.
freq2 freq
level2 level Define the second frequency (in Hz) and level
(in db). Level is defined in db.
Examples Use the following commands to re-define various tone types, frequency and
level values for the call progress tones:
> config voice tones dial on1 500 off1 0 on2 0 off2 0 freq1
425 level1 -10 freq2 0 level2 0
> config voice tones ringback on1 1000 off1 4000 on2 0 off2 0
freq1 425 level1 -10 freq2 0 level2 0
> config voice tones busy on1 330 off1 330 on2 0 off2 0 freq1
425 level1 -10 freq2 0 level2 0