Reference Guide

3 Configuration commands SIP commands
NN47928-107 133
Enter the maximum interval of time in seconds
that User Agent can ring without being
answered. If the no answer timer expires, the
call is rejected with an assigned reason of
either ring-timeout or call-forwarding on no
answer (if that feature is enabled). The default
is 60 seconds.
endofdial yes|no Enable/disable the hash (#) character at the
end of the dialed digit string; if enabled (yes),
the # character is stripped from the digit string.
The default is yes.
interdigittimeout seconds
Enter the maximum time allowed in seconds
between the dialing of digits. The default is 3
seconds. When the interdigit timer expires, the
gateway assumes that the digit string is
complete and interprets it according to its
numbering plan. This timer does not apply to
an emergency call; when the gateway receives
the emergency number (for example, 911), the
call is placed immediately.
Example > config sip ua settings seenable yes setimer 600 minsetimer
500
Related
commands
display sip ua settings
show sip ua settings
show sip ua port