Reference Guide

2 Command interface overview Online help
NN47928-107 13
Online help
To get online help with commands while logged in to the device, use the
Help command
.
General help
To list general information about the CLI, perform the following steps.
1. Type help after a command prompt and press the enter key:
> help
A long list appears. Commands are listed under the following headings:
Maintenance Commands:
Command Groups (CLI commands):
2. Notice the help listing describes how to get more specific command help
for maintenance commands:
Help Summary:
------------
Maintenance Commands:
Type the name of any of the maintenance commands to execute
it. You can also
use the '?' to bring up help at any time. This displays
context help or help on the various parameters. For example,
'cp ?' to display help information for the 'cp' maintenance
command.
Command Groups:
You interact with these configurable items in a simple manner
by using a few
commands.
Commands:
config [command group] [command sub-group] [PK] [parameter <value>]
[command group] is the name of the group of commands, 'sip'
for example.
[command sub-group] is the name of the sub-group of commands,
'sc settings' for
example.
[parameter] is the name of a parameter, 'wanrxport' for
example.
<value> is the value of a parameter, '5060' for example.
[PK] is the primary key, some elements require this, others do
not.
You can choose to specify parameters. If no parameters are
specified, interactive edit mode starts. Each parameter can be
configured separately.
To abort the interactive edit mode enter ctrl^c, to save enter
ctrl^z or 'exit.'
Valid commands are: