User Guide

9600 Series User Guide Page 27
Issue 05d (Wednesday, March 07, 2012)B5800 Branch Gateway
Making Calls: Calling from the Call Log/History
2.5 Redialling a Previous Number
When Redial is displayed it can be used in one of two ways, set by the phone's redial mode setting .
List Mode
This redial method is used when your phone's redial mode is set to List.
1.Access the redial list.
a. Press Redial. The list of outgoing calls is displayed.
b.Use the up and down arrow keys to scroll through the 10 most recent outgoing calls.
2.Press Call to call the number displayed in the call record.
3.Continue in the same way as for a normal dialed call.
One Number Mode
This redial method is used when your phone's redial mode is set to One.
1.Press Redial.
2.The number for the most recent outgoing call in your personal call log is redialed.
3.Continue in the same way as for a normal dialed call.
2.6 Making a Page Call
In order to make page calls you must have access to a paging short code provided by the system administrator or to a
paging feature button.
If the dialing short code or the paging button have been pre-configured with a number, the user or group at that number
will be paged if available.
The dialing short code can be configured to accept the number of the user or group to page when dialed. Similarly a
paging button can be set to allow number entry when pressed as follows:
1.Press the paging button.
2.Dial the number of the user or group you want to page.
3.When the dialing is completed, the page call is made.
· If the destination is a user and they already have a call connected, they cannot be paged. If the destination is
a group which is not in service or has no available members, it cannot be paged.
Feature Button
The self-administer function can be used to assign a feature button as a page button using the Group Paging action.
2.7 Withholding Your Number
You can select to withhold your number on external calls. Note that this option may not be supported in all situations. It
may depend on the configuration of your phone system and options supported by your telephone line provider.
1.Press the Features soft key if shown. To do this during a call, press the PHONE key and then press the
Features soft key.
2.Use the up and down arrow keys to highlight Call Settings. Press Select.
3.Use the up and down menu keys to highlight Withhold Number.
4.Press Change to switch the option On or Off.
5.Press Save.
36
36
36