Configuration Guide

1.1
P roduct Description and Over v i e w
rise to an unsafe level triggering a contact closure and resulting in the paging of the
freezer aisle manager. For more detailed information on contact closures, refer to
section 3.2.6, Configuring Contact Closures.
The APS Custom is a comprehensive communications solution designed to
operate as an add-on to your existing Key/PBX configuration. The unit’s features include:
• Group paging capabilities
• Seven user-customizable overhead announcements
• Numeric and alphanumeric local wireless paging support
• Eight contact closures to trigger pre-defined pages (e.g., security, emerg e n c y, etc.)
• Professional pre-recorded voice prompts
• Easy-to-use programming software
• Handling of two simultaneous inbound calls
• Storage for up to 120 or 360 customized re c o r dings (user names)
1.1.1
APS Custom Components
B e f o re installation, verify that the APS Custom arrives with the items listed below.
✔ APS Custom unit and power supply
✔ Three (3) telephone cords
✔ Local transmitter and power supply
✔ Antenna
✔ APS Custom to transmitter serial cable
✔ Plastic screw anchors
✔ Modem Cable
✔ DB9 Breakout Cable
✔ BNC 90-degree Connector
✔ DB9 to DB25 Modem Cable
1 • 2