Overview

common console for different components of the Avaya Aura
®
solution. System Manager
provides a single access interface to administer multiple branch locations and multiple
distributed B5800 Branch Gateway users. System Manager also launches IP Office Manager
in the appropriate mode where you can remotely administer individual B5800 Branch
Gateways.
As an alternative to System Manager, you can use IP Office Manager that is directly connected
to the B5800 Branch Gateway to configure a branch locally when you need to administer an
isolated branch or System Manager is not available. IP Office Manager is an application for
viewing and editing a B5800 Branch Gateway system's configuration. It is included in the
B5800 Branch Gateway administration software suite. Manager is an off-line editor. It receives
a copy of the system's current configuration settings. After changes are made to that copy and
the file is saved, Manager automatically sends the file back to the system for those changes
to become active.
Avaya Aura
®
System Manager
Using Avaya Aura
®
System Manager R6.2, you are able to:
• Upgrade B5800 Branch Gateway systems.
• Add B5800 Branch Gateway devices from the network to System Manager.
• Create B5800 Branch Gateway endpoint templates that are used to create B5800 Branch
Gateway users. These templates can be edited, duplicated, or deleted.
• Create B5800 Branch Gateway system configuration templates that can be applied to
selected B5800 Branch Gateway systems. These templates are used for initial device
provisioning. These templates can be edited, duplicated, or deleted.
• Upload and convert audio files to System Manager to be used in the B5800 Branch
Gateway System Configuration Auto Attendant feature.
• Manage B5800 Branch Gateway system configurations. From System Manager, you are
able to launch IP Office Manager to view or edit a system configuration. With this feature,
you make changes to the B5800 Branch Gateway device through System Manager. You
are able to apply the changes immediately or schedule the changes to run at a specified
time.
• Manage B5800 Branch Gateway security configuration. From System Manager, you are
able to launch IP Office Manager to view or edit a system security configuration. With this
feature, you make changes directly to the B5800 Branch Gateway device.
• Create B5800 Branch Gateway user templates. These templates can be edited or
deleted.
• Perform a B5800 Branch Gateway backup with the option of storing the backup output in
System Manager or creating a local backup where the system stores the backup output
on the local storage attached to the B5800 Branch Gateway device.
• Perform a B5800 Branch Gateway restore. This feature allows you to restore:
- a saved B5800 Branch Gateway system configuration onto a B5800 Branch
Gateway from System Manager.
- a backup of a B5800 Branch Gateway system configuration onto a B5800 Branch
Gateway from the device SD card.
- users from System Manager to the B5800 Branch Gateway.
B5800 Branch Gateway overview
8 Avaya B5800 Branch Gateway Solution Overview June 2012
Comments? [e-mail]